Shop Discover

UPDATED: FREE SHIPPING ON ORDERS OVER $75

Care & Use Ceramic Coffee

Written by: Evan Telfer | Date: 9/26/23

CARE & USE
Disassemble lid and hand wash all parts in soapy water, rinsing thoroughly before use. Dry completely before reassembling. Hand wash only
For best results, preheat by filling with boiling water, or pre-cool by filling with cold water or ice. Empty after 2 minutes and fill the flask.
Fill at arm's length to prevent accidental scalding
Refer to barista measurement lines on inside of flask when filling. Do not fill past the measurement line.
Take care using metal spoons on ceramic lining as it may scratch.
Check seals are in place and press firmly on lid with slider open. Shut slider to close position when travelling to prevent spills.
Disassemble components and clean thoroughly after each use. 

CAUTION
If filling with BOILING LIQUID, allow to cool with LID OPEN for at least 3 minutes before closing.
Hot contents can create internal pressure Keep slider open for liquid above 75°C. Open slider away from face.
Check temperature of contents prior to consuming
Keep out of reach of children if contents are hot.
Do not use for carbonated drinks or dry ice. Do not use in the microwave, oven or freezer.
Do not overfill Juice, dairy or other liquids that spoil easily should not be kept in product for prolonged periods. Juice can ferment within a day, causing the lid to pop open, leading to injury or spills.
Do not use abrasive cleaners containing bleach chlorine or other abrasives and harsh chemicals on any part of the cup 

TO REMOVE SLIDER FROM LID
Move slider to open position
Lift from front of slider
Wash

TO REASSEMBLE 
Insert slider to open position
Note: Slider cannot be removed or assembled in closed position

null