Shop before 15th December to receive your order before Christmas
Care & Use
Disassemble lid and hand wash all parts in soapy water, rinsing thoroughly before use. Dry completely before reassembling. Handwash only.
For best results, preheat by filling with boiling water, or pre-cool by filling with cold water or ice. Empty after 2 minutes and fill the tumbler.
Straw for cold liquids only, remove for hot.
Fill at arm's length to prevent accidental scalding.
Take care using metal spoons on ceramic lining as it may scratch.
Check seals are in place and do not over fill to ensure lid can be placed on securely.
Screw on lid with slider open (or straw in). Shut slider to close position when travelling to prevent spills.
Disassemble components and clean thoroughly after each use. For a thorough clean use a straw brush.
DO NOT use the straw for hot liquids.
If filling with BOILING LIQUID, allow to cool with LID OPEN for at least 3 minutes before closing.
Hot contents can create internal pressure. Keep slider open for liquid above 75°C. Open slider away from face.
Keeps liquids very hot, allow to cool to drinking temperature before closing lid.
Check temperature of contents prior to consuming.
Keep out of reach of children if contents are hot.
Do not use for carbonated drinks or dry ice.
Do not use in the microwave, oven or freezer.
Do not overfill.
Juice, dairy or other liquids that spoil easily should not be kept in product for prolonged periods. Juice can ferment within a day, causing the lid to pop open, leading to injury or spills.
Do not use abrasive cleaners containing bleach chlorine or other abrasives and harsh chemicals on any part of the cup.
To Remove Slider From Lid
Move slider to open position.
Lift from front of slider.
Insert slider to open position.
Note: Slider cannot be removed or assembled in closed position.