Shop Discover


Ceramic Coffee Cups

Care & Use 
Disassemble lid and hand wash all parts in soapy water, rinsing thoroughly before use. Dry completely before reassembling. Hand wash only.
For best results, preheat by filling with boiling water, or pre-cool by filling with cold water or ice. Empty after 2 minutes and fill the flask.
Fill at arm's length to prevent accidental scalding.
Refer to barista measurement lines on inside of flask when filling. Do not fill past the measurement line.
Take care using metal cutlery on ceramic lining as it may scratch.
Check seals are in place and press firmly on lid with slider open. Shut slider to close position when travelling to prevent spills.
Disassemble components and clean thoroughly after each use. 

If filling with BOILING LIQUID, allow to cool with LID OPEN for at least 3 minutes before closing.
Hot contents can create internal pressure. Keep slider open for liquid above 75°C. Open slider away from face.
Check temperature of contents prior to consuming.
Keep out of reach of children if contents are hot.
Do not use for carbonated drinks or dry ice. 
Do not use in the microwave, oven or freezer.
Do not overfill. 
Juice, dairy or other liquids that spoil easily should not be kept in product for prolonged periods. Juice can ferment within a day, causing the lid to pop open, leading to injury or spills.
Do not use abrasive cleaners containing bleach chlorine or other abrasives and harsh chemicals on any part of the cup. 


To remove slider from lid

Move slider to open position.
Lift from front of slider.


To reassemble

Insert slider to open position.
Note: Slider cannot be removed or assembled in closed position.