Care & Use
Disassemble lid and hand wash all parts in soapy water, rinsing thoroughly before use. Dry completely before reassembling. Lid is dishwasher safe. Body is handwash only.
For best results, preheat by filling with boiling water, or pre-cool by filling with cold water or ice. Empty after 2 minutes and fill the flask.
Fill at arm's length to prevent accidental scalding.
Refer to barista measurement lines on inside of flask when filling. Do not fill past the measurement line.
Take care using metal spoons on ceramic lining as it may scratch.
Check seals are in place and screw lid on base tightly. Rotate top disc to closed position when travelling.
Disassemble components and clean thoroughly after each use.
Caution
If filling with BOILING LIQUID, allow to cool with LID OPEN for at least 3 minutes before closing.
Check temperature of contents prior to consuming.
Keep out of reach of children if contents are hot.
Do not use for carbonated drinks or dry ice.
Do not use in the microwave, oven or freezer.
Do not overfill.
Do not use abrasive cleaners containing bleach chlorine or other abrasives and harsh chemicals.
Juice, dairy or other liquids that spoil easily should not be kept in product for prolonged periods. Juice can ferment within a day, causing the lid to pop open, leading to injury or spills.
Remove lid from stainless steel base.
Ensure TOP DISC is in a open position.
Place the lid on a flat surface and firmly push down on the shaded area ( highlighted in the diagram) until the TOP DISC is dislocated.
Separate the 3 part system by unscrewing the TOP and BOTTOM discs.
Clip TOP DISC into place. (align arrows)
Ensure TOP DISC is in the open position.
Ensure RED/GREY SEALS are in place.
Screw in BOTTOM DISC.